Essential components of an air compressor are the air tool hoses. When the air compressor stores the pressurized air energy, it is with the help of the tube; the air transferred to the connected instruments. A truly compatible and best air hose reel will make sure that it has a tight seal and deliver the required air pressure for the purpose it wants to use. Having a not-so-tight seal can be the primary reason for performance deficits.
Air tool hoses can become damaged due to several reasons such as it prematurely ages, gets bent, reaches expiry or as the connector gets damaged.
When you expect the least, they get cracked or get popped. Whatever the situation be, you need to fix it immediately. Getting a new hose is not always an option because some of the best air hose reels will be expensive.
Materials Needed
- Replacement hose piece ( if you need it)
- Standard hose repairing kit
- Air hose connectors of right size
- screwdriver
How To Do It
Step 1
Unscrew the hose in an anticlockwise direction from the bottom the air compressor to remove the hose. Remove the couplers and keep it somewhere for easy access.
Step 2
First, you need to cut off the damaged portion of the tube. Depending on the type of breaks like crack, pinhole or split, decide how much you have to cut off. Make sure that you remove all of the damaged hose, or you need to repeat all these soon again. Use any hose cutters to remove the unwanted section but remember to cut in a square way.
Step 3
Now take a clamp out of the standard air hose repairing kit. Put on the clamp on to the hose and put the connector on. Always get the right size the connector which exactly matches the diameter of the air hose so that it fits right. Even if the hose is a bit big, you can tighten it by adjusting the clamp. Tighten the clamp till the hose become tight enough so that the connector goes in correctly. Once the connector goes it successfully, tighten the clamp once again to hold everything in place. Make sure that you do not break the clamp while applying pressure on it.
Step 4
Now move on to the nest end of the hose and put another clamp on it. Now join the two hose ends together and tighten both the clamps using a screwdriver if needed. Now you just have to wrap up everything neatly using an insulation tape. And you are done!
Type Of Air Tool Hoses – Coiled And Retractable Hose
There are different types of air hoses mainly classified as coiled and retractable. Retractable ones don’t have any coils, and they are straight. Those types don’t have to wind into a best air hose reel for storage. The coiled tubes have many small bends and twist that shortens the overall length of the hose. Coiled hoses shrink into smaller size once you let it go and make the storage easy.
Best Quality Air Hoses
Best quality air hoses have 3 layers namely the inner layer, the reinforcement layer and the outermost layer. The air hose comes with a particular material, and the 3 layers can be of different materials. While rubber is the standard material using to make air hoses, you can find hose made of polyurethane, nylon, and PVC. Rubber hoses are compatible with both high and low temperatures, and they are commonly using in gas stations.
PVC is plastic which is suitable for conditions where you require flexibility the most. It is an economical choice and hence used for inflating purposes. Some material goes well under certain circumstances and is durable whereas, some materials become brittle fast.
Conclusion
When you are all done, do not forget to test the hose by slowly raising the air pressure and also use soapy water to check for bubbles. You can increase the life of your best air hose reel by just doing repairs the way explained above in this article. If you are not a DIY person and you need any help, do not hesitate to call a repair professional to do the job for you. A timely repair can save unwanted investment for buying a new air hose.